4
•
Your appliance is produced in accordance with all applicable local and international
standards and regulations.
•
Maintenance and repair work must only be made by authorised service
technicians. Installation and repair work that is carried out by unauthorised
technicians may endanger you. It is dangerous to alter or modify the specification
of this appliance in any way.
•
CAUTION: This appliance is designed for cooking food and is intended for indoor
domestic household use only and should not be used for any other purpose or in
any other application, such as for non-domestic use or in a commercial
environment or for heating a room.
•
Prior to installation, ensure that the local distribution conditions (nature of the gas
and gas pressure or electricity voltage and frequency) and the requirements of the
appliance are compatible. The requirements for this appliance are stated on the
label.
•
These instructions are applicable for countries of which symbols are indicated on
the appliance. If the country symbol is not available on the appliance, in order to
adapt the appliance to the conditions of such country, the technical instructions
should be read.
INSTALLATION WARNINGS
•
Do not operate this appliance before it is fully installed.
•
The appliance must be installed by an authorised technician and put into use. The
producer is not responsible for any damage that might be caused by defective
placement and installation by unauthorised people.
•
When you unpack the appliance, make sure that it has not been damaged during
transportation. In case of any defect; do not use the appliance and contact the
retailer immediately. As the materials used for packaging (nylon, staples,
Styrofoam...etc) may cause harmful effects to children and animals, they should be
collected and removed immediately.
•
Protect your appliance against atmospheric effects. Do not expose it to effects such
as sun, rain, snow etc.
•
The surrounding materials of the appliance (cabinet) must be able to withstand a
temperature of min 100°C.
•
Ensure that the supply cord is not wedged during the installation. If the supply cord
is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to prevent a hazard.
•
Installation by a qualified technician is mandatory.
•
Your hob is adjusted in compliance with 220-240V AC,50/60Hz. electric supply, and
must not be connected if your supply differs from this.