6
INSTALLATION
BEFORE INSTALLING YOUR CANOPY HOOD:
•
Please read the instructions carefully.
•
Unpack the hood and check that all functions are working.
Ensure that the voltage (V) and the frequency (Hz) indicated
on the serial plate match the voltage and frequency at the
installation site.
•
Check that the area behind the installation surface to be drilled
is clear of any electrical cables or pipes, etc.
•
The surfaces of the canopy are very easily damaged during
installation if grazed or knocked by tools. Please take care to
protect the surfaces during installation.
•
Protect the cooktop surface below with cardboard, or similar,
to prevent damage occurring whilst the hood is being installed
above.
•
The manufacturer shall not be liable for any failure to observe all safety
regulations in force for the correct and normal operation of electrical
products.
CHANGING THE VENTILATION METHOD
EXTRACTION
(TOP VENT)
RECIRCULATE
EXTRACTION MODE
Turn the lever to this position when
using with an external vent pipe
RECIRCULATE MODE
Turn the lever to this position
when venting back into the room.
This mode must be used with an
optional carbon filter.
