9
WALL MOUNTING INSTALLATION:
1. Drill two 10mm diameter holes in the correct position on the wall
when compared to the hanging holes on the rear of the hood. Make
sure the hood is aligned directly over the hob, a minimum of 65cm
above the hob surface.
2. Insert two plastics wall plugs into the holes.
3. Insert two screws into the wall plugs and tighten them leaving around
3mm protruding from the wall.
4. Mount the cooker hood onto the two screws and mark the bottom two
screw positions.
5. Remove the hood and drill the bottom two screw holes and insert the
plastic wall plugs.
6. Mount the hood on the top screws, insert the bottom screws and fully
tighten all the screws.
Information
The air must not be discharged into a flue that is used for
exhausting fumes from appliances burning gas or other fuels.
