ElectrIQ EDR-TRD1025B, Руководство пользователя

Страница: 11 / 23

11
CONNECTING THE APPLIANCE TO WIFI
DOWNLOAD THE APP TO YOUR PHONE
Download the” TUYA SMART” app, from your chosen app store, using the
QR codes below, or by searching for the app in your chosen store.
MODES AVAILABLE FOR SETUP
It is recommended to use Bluetooth connection to connect your unit to Wi-
Fi. This is the easiest connection method and will ensure that no time is
wasted in getting to use your new heater to its fullest potential.
To connect the unit to Wi-Fi via Bluetooth connection, ensure your mobile
phone has both WiFi and Bluetooth enabled and simply plug the heater in
and switch it on, the unit should now be in connection mode with the WiFi
indicator flashing. If the indicator does not flash, follow the step below to
reset the WiFi within the unit. We would advise that mobile data is turned
off during the connection process.
The unit can also be set up using the Quick connection method within the
app.
You can then follow the steps in the following sections to link the unit and
customize your app.
RESET THE WiFi
To reset the WiFi, with the unit in standby, press and hold the Timer, - and
Mode buttons for a couple of seconds until the unit bleeps and the WiFi
indicator starts to flash.
+ +
ANDROID IOS