7
PREPARING FOR USE
IMPORTANT!
Two people are recommended for assembly
•
On a soft surface, turn the radiator upside
down. It is recommended that one person
holds the radiator steady during assembly to
prevent damage.
•
Carefully slide out each of the four legs until
they are fully extended.
•
Once the legs are extended, gently turn the
unit to its upright position.
WARNING:
Do not operate without the castors. Only operate the heater
in an upright position with the legs fully extended.
POSITIONING THE HEATER
•
Place the unit in an upright position on a flat, stable and heat-resistant
surface.
•
Ensure that there are no flammable or heat-sensitive materials or
substances within 50cm of the unit.
•
Do not cover the heater.
CONNECTING THE HEATER
•
Before inserting the plug into a suitable socket, ensure that the
appliance is intact, properly assembled and that there are no signs of
damage to the appliance or its power cable.
•
To avoid overloading a circuit, do not use the appliance on a circuit
with other high-powered equipment unless you have confirmed the
circuit is suitable.
•
Do not use with an extension lead.
•
With the power switch is in the OFF position, insert the plug into an
earthed socket before following the operating instructions to use the
product.
REMOTE CONTROL
The remote control follows the same
button scheme as the control panel on
the unit. Please see page 8 for details
on the operation.
The remote control contains a 2025 3V
lithium battery. Please refer to the
safety instructions for proper battery
safety.
Содержание EDR-TRD1025B
Страница 2: ...2 ...
