9
OPERATION
NOTES:
•
The
recommended humidity for a standard room is within the range of 50% to 70%, provided no
special requirements are made.
•
Although the desired humidity can be set as low as 10%, lower settings will act as a continuous
mode, as they are unlikely to be achievable in the UK.
Press once to turn the unit on. Press again to turn the unit off.
Increase the desired humidity between 10% and 95%RH.
Also used to adjust the timer duration following pressing the TIMER button
Decrease the desired humidity between 10% and 95%RH.
Also used to adjust the timer duration following pressing the TIMER button
Press the timer button to activate the timer. Use the UP and DOWN buttons to
adjust the timer duration (00-24hr).
The timer can be used in standby mode to specify in how many hours the unit
will turn on, or while the unit is operating to specify in how many hours the unit
will turn off. The Timer indicator will illuminate when the timer is activated.
The uplift pump works by collecting water within a small tank, before using a
small pump to expel the water from the machine through the drain pipe. When
the tank is operating, the pump light will illuminate.
Power
Button
Timer
Button
Decrease
Button
Increase
Button
Pump
Indicator
Timer
Indicator
Power
Indicator
Display
