Electrify America innogy eBox professional, Руководство по установке

Страница: 24 / 28

24
DOCK INSTALLATION INSTRUCTIONS
Dismounting
Only a qualified electrician should dismount the Dock.
You must disconnect the main power supply before
dismounting the charger. After power has been
disconnected, loosen the two set screws on the side.
Take the charger out of the Dock by pulling down the
locking bracket, taking out the charging unit, and,
if fitted, detaching the Ethernet cable connecting the
charger and the Dock. Now remove the contact guard
from the dock, and detach the supply cable and, if
fitted, the Ethernet cable to the local network. Unscrew
the cable gland(s), and remove the supply cable and,
if fitted, the Ethernet cable(s). In the next step, unscrew
and remove the Dock. Finally, you may replace the
contact guard.
CAUTION
When dismounting the charger,
remove the charger from the
Dock carefully to avoid damaging
the flat ribbon data cables,
Dock and charger.
CAUTION
Make sure that all components
are dry during dismounting of
the charger or Dock.
DANGER
The Dock must be disconnected
from the power supply before
dismounting the charger and/or
Dock.
Disposal
The Dock and the charger are electrical equipment.
Follow all national and local laws, regulations, ordinances
and codes regarding disposal.