7)
The ambient operating temperature range for this device is -22°F (-30°C) to 122°F (50°C).
Do not operate the charger outside this operating range.
8)
Electrify America is not responsible for physical injury, damage to property or equipment
caused by the installation, usage, repair, or maintenance of this product.
9)
These operating instructions describe the usage of the charger in most commonly used
installation and mounting scenarios. If situations arise in which it is not possible to
perform an operation following the procedures provided in this document, contact
Electrify America. Electrify America is not responsible for any damages that may occur
resulting from custom installations or operations that are not described in this document.
10)
Personal Protection Equipment: Use of proper personal protection equipment, including, but not
limited to, eye protection, shock protection, gloves, and other appropriate protection, is
recommended when installing or servicing any electrical equipment. To reduce the risk of fire, only
connect this equipment to a maximum 50 amperes overcurrent protection device in accordance
with the National Electrical Code, ANSI/NFPA.
11)
Do not use this equipment in an area with hazardous or flammable materials or vapors.
12)
Arcing Component in Contactor: The charger includes contactors that, when opened or closed, will
cause a short duration arc. The contactor is enclosed in an appropriate electrical enclosure, but
caution is required if this arc occurs in the presence of flammable vapors as the vapors could ignite,
creating an explosion. Store hazardous and flammable vapors and materials away from all electrical
equipment. If hazardous or flammable sources are present, allow sufficient time for ventilation
before operating the charger.
13)
Do not open the charger at any time during installation or operation! Only trained personnel should
open the charger.
14)
Handling live components incorrectly may cause grievous injuries or death.
15)
If the electricity service to the charger is damaged, immediately shut down the power to the
charger by switching off the circuit breaker and contact a licensed electrician.
16)
Turn off circuit before remounting or replacing the charger.
17)
To reduce the risk of fire, connect only to a circuit provided with the proper maximum branch
circuit overcurrent protection in accordance with the National Electrical Code and local laws,
regulations, codes, and standards.
18)
Ensure that all components are dry throughout the installation.
19)
Product subject to modification without prior notice. This document might not contain the latest
changes to the product’s specifications or processes described herein. For the most up-to-date
information, please visit
electrifyhome.com
6 ) EMC Compliance Statement: FCC Part 15 Subpart B, Class B
FCC ID: 2AX8SEA2R040JPA1000
1)
RF Exposure warning
This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
2)
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
Содержание EA2R040JPA10-00
Страница 2: ...ELECTRIFYHOME COM Customer Support 833 532 2778...
Страница 7: ...Product Overview...
