Electrify America EA2R040JPA10-00, Инструкция по установке и эксплуатации

Страница: 15 / 19

Charger Status
If you are experiencing difficulty charging, a fault indicator light, or any other issue using the charger,
please see section 7 (Troubleshooting) for assistance.
If the issue persists, please contact Electrify America Customer Support at (833) 532-2778.
Status Indicator
The charger is equipped with an integrated LED ring to allow for clear communication of the charger’s
status. For energy efficiency, only the bottom section of the LED ring will remain illuminated after
(approximately two minutes) since the last user interaction.
Indicator Definition
PATTERN DEFINITION
Slow flashing 2 seconds between flashes.
Fast flashing Less than 1 second between flashes.
1 flash 1 second on, 5 seconds off.
2 flashes 1 second on, 1 second off, 1 second on,
5 seconds off.
3+ flashes These follow the same patterns as
above.
Understanding Status Indicator Patterns
LED COLOR INDICATOR DESCRIPTION
No color Power off.
Blue & green, alternating and fast
flashing Initial and self-test.
Green, solid Standby.
Blue, fast flashing EV connected.
Blue, slow flashing Preparing to charge.
Blue, solid Charging.
Green, slow flashing Charging finished or stopped by user.
Yellow, bottom section only First successful connection to Wi-Fi
Red, constant, and/or flashing Fault indicator. See section 6.4 for
troubleshooting.
Faults
LED INDICATOR DESCRIPTION
Red, 1 flash High or low input voltage detected.
Red, 2 flashes Ground fault detected.
Red, 3 flashes Ground connection error.
Red, 4 flashes High input current detected.
Red, 5 flashes Operating temperature limit
exceeded. Disconnect the unit from
power.
Red, 6 flashes Installation error. Line and neutral are
swapped.
Red, 7 flashes Vehicle communication error.