Electrify America EA2R040JPA10-00, Инструкция по установке и эксплуатации

Страница: 11 / 19

Installation Steps
This product must have a proper electrical ground connection. Proper electrical grounding reduces the
risk of electric shock. This product is equipped with a power supply cable that includes an equipment
grounding conductor. The power supply cable must be plugged into a compatible outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
WARNING - Improper connection of the power supply cable can result in a risk of electric shock. Check
with a qualified electrician to ensure the product is properly grounded. Do not modify the power supply
cable provided with the product. Ensure the proper outlet is installed by a licensed and qualified
electrician.
1
INSTALL THE MOUNTING BRACKET
1. The product is a stationary piece of equipment that is designed to be mounted on a wall. The mounting
template, included with the product, shows the proper location to drill pilot holes for the mounting bracket
screws.
2. Using a level, place the mounting template in the location where you would like to mount the charger.
3. Tape the template in place and measure the height to ensure the charger is between 31.5" (80 cm) and 47.2"
(120 cm) above the floor.
NOTE:
The bracket must be mounted on a flat surface so that the bracket does not deform when properly
secured.
1. Install the mounting bracket securely to the wall, aligning the holes in the bracket with those marked on the
wall, and secure the mounting bracket using the provided screws or other fasteners that best suit your specific
installation needs.
1. Once the mounting bracket is installed, place the charger into the bracket and secure the charger to the
bracket using the 4 supplied T30 Torx screws.
2
INSTALL THE HOLSTER
The cable holster is optional. Install the holster measured from the bottom between 31.5" (80 cm) and 43.3"
(110 cm) above the ground. Please select the proper mounting hardware for your particular installation.