M274
Pg. 11 of 20
BASIC SETUP FUNCTIONS
“Set Time:”
!
Allows user to set time shown on LCD display
!
Displays “GPS” if GPS is being used
!
NOTE: User cannot set time when GPS is locked
(GPS always maintains correct time)
“Set Date:”
!
Allows user to set Date
“Enter Hand Pos:”
If clock hands are not indicating correct time, user must tell 99B-MI where
hands are pointing so controller can reset hands to correct position.
!
Enter position of clock hands
!
Clock hands will not move while this menu is displayed
!
This menu will not “time out” or shut off, so user has time to go outside
building to view clock if necessary
!
When done, hold “CANCEL” key for 5 seconds to exit menus and allow
99B-MI to reset clocks to correct time
“Chimes”
!
Allows user to configure Chimes and Hour Strike
outputs
!
See Manual M274-C (99BMI Chime System)
“Time Mode:”
!
12 Hr:
Sets LCD display to standard 12 Hour clock
!
24 Hr:
Sets LCD display to “Military Time” 24 Hr clock
Ti m e M o d e :
1 2 H r
S e t Ti m e :
1 2 : 0 0 : 0 0 P M
S e t D at e :
2 0 0 9 - J u n - 0 1
E n t e r H a n d Po s :
1 1 : 2 0
C h i m e s :
E n abl e d
06-01-2009
Electric Time Company, inc. Medfield, MA 02052 USA
Ph: (508) 359-4396 Fax: (508) 359-4482
www.electrictime.com
