EHC Electric Combination Radiators –
Installation and technical manual
Page 2
CONTENTS
1.
Safety information
.........................................................
2
2.
General information
.......................................................
4
3.
Installation
.....................................................................
5
4.
Operating instructions
...................................................
10
5.
Operating safety
............................................................
10
6.
Technical data
................................................................
13
1.
Safety Information
Electrical Connections
IMPORTANT
The wires in the mains leads are coloured in accordance with the following code:
GREEN & YELLOW:
EARTH
BLUE:
NEUTRAL
BROWN:
LIVE
WARNING – THIS APPLIANCE MUST BE EARTHED
The installation of this appliance should be carried out by a competent electrician in
accordance with I.E.E. Regulations for Electrical Equipment.
The radiator is fitted with a standard UK 3 pin plug that can be directly connected to an
electrical socket.
Care must be taken when connecting radiators in this way not
to overload the ring main circuit. If you are unsure contact a qualified
electrician.
Alternatively the mains cable can be cut to length and connected to a suitable fused 20
amp double-pole switched spur adjacent to the radiator. Please ensure that the
electricity supply is disconnected prior to using this installation method.
Each supply circuit to the radiator must incorporate a Fused 20 Amp double pole
switched spur having a contact separation of at least 3mm.
