EN
10
2.
To delete the RFID access tags/cards from the memory of the panel:
- Long touch the
Fam. 1
key until the acoustic confirmation of the panel with a long beep.
- Short touch the
Fam. 1
key 7 times. The panel issues two short confirmation beeps.
- Immediately after, long touch (2-3 sec.) the
Fam. 1
key. All the codes of the RFID access tags/cards are deleted
permanently. The action is acoustically confirmed by a long beep.
3.
Go to the place where the
SCU
central unit of the installation is mounted. Short press the
PROG
button on the
SCU
.
The Red LED turns off. The installation returns to normal functioning mode.
4.
Optional: From the outdoor panel, check if the old RFID tags/cards grant access. When each RFID tag/card that has
been deleted from the memory is approached to the panel, a low frequency beep will be issued.
Adding a new RFID access TAG/CARD in the panel
This procedure applies when you wish to
add new RFID access tags/cards
in the outdoor panel.
1.
Collect all the RFID tags/cards from all the people who have access in the building and prepare the new access
tags/cards.
2.
First, follow the procedure described in
chapter 5.2
for deleting all the tags/cards from the memory of the panel.
3.
Follow the procedure described in
chapter 5.1
. In this case, when you perform
point 2
of
chapter 5.1
, it is mandatory
to approach both the new access tags/cards, and the old tags/cards to the RFID area of the panel,
for reprogramming.
4.
After performing
point 3
of
chapter 5.1
, check if access is granted for all the programmed and reprogrammed
RFID access tags/cards.
The
Touch Line
audio-video terminals must be kept away from water, lime or any liquid substances, blows, fumes, powders,
dust etc.
For cleaning the glass screens, use a clean cloth and a special solution for glass washing.
In case of renovation activities, the entire surface of the panels will be protected with plastic foil.
DO NOT undo the electrical connections of the video door phone installation components.
DO NOT short-circuit the electrical connections of the video door phone installation components.
a.
Warranty is granted according to the current legislation in the buyer's country of residence, based on the purchase documents.
b.
Warranty is granted for the hidden defects of the components used in production and in case of the system not functioning
according to the present user manual.
WARRANTY IS NOT GRANTED FOR:
c.
Inappropriate installation and use.
d.
Deterioration, intentional blows.
e.
Unauthorized interventions to any of the components of the installation
f.
Theft, fire, natural disasters
g.
Lack of protection of the installation components in case of renovation activities.
6
Maintenance of the video outdoor panels
7
Warranty
5.3
EN
EN
EN
