5
e11
Security PIR Motion Sensor
plus
LED Night Light
⑥
PIR sensor
⑦
LED night light
⑧
Wiring port
⑨
TIME & LUX setting knobs
⑩
Adjustable bracket for ceiling mount
INTRODUCTION
e11 is a multi-functional security motion sensor plus
dusk to dawn LED night light, it is a fully automatic
indoor and outdoor security/courtesy light controller.
At night time, LED night light will turn on to offer soft
brightness around the house for safety, it will turn off
automatically in the early morning to save the energy.
The built-in passive infrared (PIR) motion sensor will
turn on the main connected lighting load only when it
detects motion within the coverage. Time and LUX
adjustable settings will let you select how long and
when the light will stay on after PIR being activated.
Note: Read this entire manual before you start
installing the device.
SAFETY PRECAUTIONS
DO NOT install this motion sensor in outdoor
when it is raining.
DO isolate the power supply during installation or
maintenance.
DO ensure that the power supply circuit is
protected by a 16 amp circuit breaker or suitable
equivalent fuse.
The unit can be installed only vertically (see the
FIGURE 1a), not horizontally (see the FIGURE
1b).
FIGURE 1a & 1b
IMPORTANT WARNING
Dangerous currents flow through the body
when coming into direct or indirect contact with live
components, this can result in electric shock, burns
or even death.
Installation must be performed by skilled
technicians or specialist who are informed about the
standards and technical requirements of the
appliance and its proper installation.
The light source contained in this luminaire shall
only be replaced by the manufacturer or his service
agent or a similar qualified person.
Do not attempt installation unless you have some
experience with household wiring.
Before proceeding the installation and disassembly,
TURN OFF THE MAINS POWER TO THE
LIGHTING CIRCUIT AT THE CIRCUIT BREAKER
OR FUSE BOX TO AVOID ELECTRICAL SHOCK.
CHOOSING A MOUNTING LOCATION
For the best results, fix your motion sensor on a
solid surface. For wall mounting, 1.5~1.8m
above the ground is recommended. For ceiling
mounting, 2.0~3.0m above the ground is
recommended to use the optional swivel bracket.
For outdoor installation, a location under eaves is
recommended.
Avoid aiming the motion sensor at direct-sunlight,
pools with sunlight reflection, heating vents, air
conditioners or objects which may change
temperature rapidly.
Do not allow sunlight to fall directly on the front of
unit.
Try to avoid pointing the unit at trees or shrubs or
where may block the human movement or the
motion of pets may be detected frequently.
The motion sensor is more sensitive to objects
moving across its field of view. It is less
sensitive to an object moving directly towards the
sensor head. (FIGURE 2)
