Electra Accessories Scoot-N-Go 88615 Скачать руководство пользователя страница 6

5

GENERAL SAFETY GUIDELINES & RESTRICTIONS

This Manual contains many notes concerning the consequences of failure to maintain or inspect your SCOOT - N - 
GO™.  Your safety and the safety of others is very important.  We have provided important safety messages in this 
manual  and  on  the  SCOOT  -  N  -  GO™.    Please  read  these  messages  carefully.    A  safety  message  alerts  you  to 
potential hazards that could hurt you or others.  Each safety message is preceded by a safety alert symbol and one 
of two words.

You  CAN  be  SERIOUSLY  HURT  or  KILLED  if  you  don't  follow  instructions. 

  Failure  to  follow  the  instructions 

following it may result in injury to the rider or others during use, which may include loosing control and falling. 
Because any fall can result in serious injury or even death, we do not repeat the warning of possible injury or death 
whenever the risk of falling is mentioned

Failure to follow the instructions following it may result in damage to the SCOOT - N - GO™ or component during 

assembly or use. (I.e. risk of property (product) damage only)

CHECK  STATE & LOCAL LAWS

Your state department of motor vehicles (DMV), or the city or county where it will be used, may regulate the use of 

devices like the SCOOT - N - GO™. Some states may require a driver's license or minimum age to use the SCOOT - N - 

GO™, or require the SCOOT - N - GO™ to be registered or licensed or require some additional type of equipment 

like a brighter headlight.  Please check with your state DMV or local municipality on requirements for using the 

SCOOT - N - GO™. They can be located in the phonebook. State DMV offices can also be located on the Internet at 

such sites as the following www.dmv.org or www.statehousegirls.net/agencies/dmv. 

If your state or municipality allows the SCOOT - N - GO™ to be used on vehicle roadways please make sure you are 

familiar  with  all  traffic  laws  as  set  forth  by  your  state  DMV,  such  as  yielding  to  pedestrians  and  other  motorists, 

signaling, riding as far to the right edge of the roadway as possible, obeying traffic signs etc. Your state DMV can 

provide you with materials setting forth these traffic laws. 

In addition to those traffic laws abide by the following general principals:

1. You are sharing the road or the path with others -- motorists, pedestrians and other cyclists. Respect their rights, 
     and be tolerant if they infringe on yours.
2. Ride defensively. 
3. Look ahead of where you're going, and be ready to avoid:
     * Vehicles slowing or turning in front of you, entering the road or your lane ahead of you, or coming up behind you.
     * Parked car doors opening in front of you.
     * Pedestrians stepping out in front of you.
     * Children or dogs playing near the road.
     * Pot holes, sewer grating, railroad tracks, expansion joints, road or sidewalk construction, debris and other obstructions 
         that could cause you to swerve into traffic, catch your wheel or otherwise cause you to lose control and have an accident.
     * The many other hazards and distractions which can occur while using the SCOOT - N - GO™ during a ride.
4. Ride on the right side of the road, in the same direction as vehicle traffic and as close to the edge of the road as possible.
5. Stop at stop signs and traffic lights; slow down and look both ways at street intersections. Remember that the 
    SCOOT - N - GO™ will always lose in a collision with a motor vehicle, so be prepared to yield 
    even if you have the right of way.
6. Use hand signals for turning and stopping. Learn the local vehicle code for the correct signals.
7. Don't weave through traffic or make any moves that may surprise people with whom you are sharing the road.
8. Never carry anything which obstructs your vision or your complete control of the SCOOT - N - GO™, or which 
could become entangled in the moving parts of the SCOOT - N - GO™.
9. Never hitch a ride by holding on to another vehicle.

NEITHER ELECTRA ACCESSORIES NOR THE RETAIL SELLER OF THE SCOOT - N - GO™ IS RESPONSIBLE FOR 

THE CONSEQUENCES OF FAILURE TO COMPLY WITH STATE AND LOCAL ORDINANCES RELATING TO THE USE 

OF THE SCOOT - N - GO™

                                            

CALIFORNIA PROPOSITION 65

THIS PRODUCT CONTAINS LEAD AND LEAD COMPOUNDS, CHEMICALS KNOWN TO THE STATE OF CALIFORNIA 

TO CAUSE CANCER AND REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

Содержание Scoot-N-Go 88615


























Отзывы: