Electra Accessories Scoot-N-Go 88615, Инструкция по сборке и эксплуатации, Страница: 18 / 25

17
PATCHING A TUBE IS AN EMERGENCY REPAIR. CARELESS PATCHING OR APPLYING SEVERAL PATCHES CAN
SERIOUSLY WEAKEN THE TUBE, RESULTING IN POSSIBLE TUBE FAILURE, WHICH COULD CAUSE YOU TO
LOOSE CONTROL AND FALL. REPLACE A PATCHED TUBE AS SOON AS POSSIBLE.
5. Reinstall the tire and tube. Slip one tire bead over the rim. Insert the valve stem through its hole in
the rim. Feed the tube carefully into the cavity of the tire. Inflate the tube just enough to give it some
shape. Starting at the valve stem and working around both sides of the rim to the side opposite the
valve stem, use your thumbs to push and seat the other bead of the tire inside the rim. Be careful not to
pinch the tube between the tire bead and the wheel rim. If you have trouble getting the last few
inches of bead over the edge of the rim with thumb pressure, use a tire lever and be careful not to
pinch the tube.
6. Check to make sure that the tire is evenly seated around both sides of the rim and that the tube is
inside the tire beads. Push the valve stem into the tire to make sure that its base is seated within the
tire's beads. Inflate the tube slowly to the recommended pressure on the tire sidewall. Check to make
sure that the tire beads stay seated in the rim. Replace the valve cap. Replace the wheel in the scooter.
RIDING YOUR SCOOT - N - GO™ WITH A CUT TIRE, FLAT OR UNDER- INFLATED TIRE CAN SERIOUSLY
DAMAGE THE TIRE, RIM (WHEEL), TUBE, AND THE SCOOTER. IT MAY ALSO CAUSE YOU TO LOSE
CONTROL AND FALL. IF YOU USE A SCREWDRIVER OR ANY TOOL OTHER THAN A TIRE LEVER, YOU
ARE LIKELY TO PUNCTURE THE TUBE. Replacement parts are able to be purchased by calling the
Electra Customer Service at 1-888-967-1234 M-F 10am - 9pm EST or by visiting Electra's website at
www.electraUSA.com.
DO NOT USE GAS STATION AIR FILLING STATIONS AS THE PRESSURE IS USUALLY TOO HIGH AND THE
GAUGES ARE INACCURATE. OVER INFLATION OF THE TIRE COULD CAUSE A BLOW OUT AND CRASH
BATTERY MAINTENANCE
*Refer to battery charging instructions
BATTERY RECYCLING
When maintained and used properly, (by following charging and storage guidelines), the Lead Acid Battery
used in this product has a normal life span of many miles. When the battery no longer holds a charge or is
unable to be charged properly, it should be removed from the SCOOT - N - GO™ and delivered to a
recycling facility. State Laws prohibit disposal of lead-acid batteries in everyday trash. Please contact your
local solid waste or recycling authority for recycling information in your area.
SERVICE & MAINTENANCE