
15
BATTERY
BEFORE OPERATING YOUR NEW SCOOT - N - GO™ FOR THE FIRST TIME, THE BATTERY MUST BE
FULLY CHARGED! FAILURE TO KEEP THE SCOOT - N - GO ™ BATTERY CHARGED WILL CAUSE TOTAL
BATTERY FAILURE. DO NOT ALLOW BATTERY TO BE FULLY DISCHARGED!
ONCE CHARGER IS PROPERLY ATTACHED TO SCOOTER AND A SUFFICIENT POWER SOURCE, THE
CHARGER INDICATOR LIGHT WILL FLASH INDICATING THE UNIT IS BEING PROPERLY CHARGED.
ONCE FULLY CHARGED THE INDICATOR LIGHT WILL REMAIN GREEN
Be sure to charge the SCOOT - N - GO™ after each use. Keeping the battery
properly charged will help extend the battery life. The battery must be charged while installed in the
SCOOT - N - GO™. If you notice anything unusual about the battery such as a
cracked or leaking battery case, a battery that gets hot while being used or charged, a battery case that
appears "puffy" or "bloated" etc, or there are any other problems with the battery, please contact
Electra Customer Service / Technical Support Toll-Free at 1-888-467-1234 M-F 10am - 9pm EST.
The battery is sealed and is NOT user serviceable. Do not attempt to repair, remove, adjust or in any
way alter any internal or electrical components, controls or wiring without first speaking with a
customer service representative.
THE SCOOT - N - GO™ IS EQUIPPED WITH A 24V BATTERY CHARGER THAT WILL
INTERRUPT THE CHARGING PROCESS ONCE THE BATTERY HAS RECEIVED A SUFFICIENT CHARGE.
CHARGING THE BATTERY
• DO NOT CHARGE OR STORE THE SCOOT - N - GO™ CLOSER THAN 20 FEET
FROM ANY FLAME (E.G. FURNACE, FIREPLACE, WATER HEATER, SPACE HEATER)
•
Be sure to only use 110V AC with the SCOOT - N - GO™ charger. Also make sure
the plug is inserted into a three prong grounded AC outlet.
•
PLUG the POWER INPUT CORD into the SCOOT - N - GO™ charging receptacle.
•
Plug the SCOOT - N - GO™ 24V battery charger into a 110V AC power source.
•
The CHARGER INDICATOR LIGHT will illuminate confirming that power is connected to the charger. If
the light does not come on check all connections. If it still does not come on after checking all
connections, fuses and that your AC plug is working, unplug the charger and call Electra Customer
Service / Technical Support Toll-Free at 1-888-467-1234 M-F 10am - 9pm EST
•
When the light on the 24V charger light is solid green, your SCOOT - N - GO™ is fully charged
•
Disconnect the Input Cord from the Charging Receptacle.
•
Disconnect the charger from the 110V Power Source.
• NEVER LEAVE THE BATTERY CHARGER CONNECTED TO THE 110V POWER SOURCE OR THE
SCOOT - N - GO™ WHEN NOT CHARGING THE BATTERY. KEEPING THE CHARGER
PLUGGED INTO THE 110V POWER SOURCE AND NOT THE BATTERY COULD CAUSE THE CHARGER
TO OVERHEAT AND OR CAUSE A FIRE.
•
When storing your SCOOT - N - GO™ for lengthy periods of time, the battery
should be charged at least once a month to avoid full battery depletion.
CALIFORNIA PROPOSITION 65
BATTERY POSTS, TERMINALS, POWER CORDS AND BRAKE CABLES MAY CONTAIN LEAD AND LEAD
COMPOUNDS, CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND
REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
Содержание Scoot-N-Go 88615
Страница 25: ...24 NOTES ...