Elecsys WATCHDOG II MESH, Инструкция по установке и эксплуатации

Страница: 4 / 38

Watchdog II Mesh User Manual
P/N 86-0006-00 Rev E 01-2020 Page
4 of 38
Materials Supplied
After unpacking the units and checking for obvious damage, make sure the following items have been
supplied with each WatchdogCP Wireless Remote Monitoring System ordered:
For cellular communication based WatchdogCP RMU Systems:

1 ea. WatchdogCP ‘Mesh’ RMU (P/N NTG-01-0003-00)

2 ea. RMU mounting brackets

1 ea. 3-
Channel “Smart Node” Analog Measurement Module (P/N NTG-01-0002-00)

1 ea. AC Probe
– AC current sensor to determine presence of AC power at the Rectifier

4 ea. NiMH Rechargeable Batteries for the Smart Node
For satellite communication based WatchdogCP RMU Systems:

1 ea. WatchdogCP ‘Mesh’ RMU (P/N NTG-01-0003-01)

2 ea. RMU mounting brackets

1 ea. Skywave IDP satellite modem with right-angle mounting bracket

1 ea. 3-
Channel “Smart Node” Analog Measurement Module (P/N NTG-01-0002-00)

1 ea. AC Probe
– AC current sensor to determine presence of AC power at the Rectifier

4 ea. NiMH Rechargeable Batteries for the Smart Node
If permanent Interruption capability has been ordered, the following additional items are supplied:

1 ea. Interrupter II Module (P/N NTG-01-0006-XX)
Relay Options (-XX):
100 Amp Mercury Relay
100 Amp Solid State AC Relay with 100 Amp Mercury Bypass Relay
100 Amp Solid State DC Relay with 100 Amp Mercury Bypass Relay

1 ea. Trimble GPS antenna (P/N 42-0018-00)

1 ea. Interruption system wire harness cable

1 ea. Current sensor for the interrupter system