Elecrow CrowPi All-in-One Kit, Быстрый старт

Страница: 9 / 20

INDEPENDENT BUTTON UP: pin37/GPIO26
DOWN: pin33/GPIO13
RIGHT: pin35/GPIO19
LEFT:pin22/GPIO25
GPIO INPUT UX1-5 ON
UX1-6 ON
UX1-7 ON
BUTTON ARRY Row1: pin13/GPIO27
Row2: pin15/GPIO22
Row3: pin29/GPIO5
Row4: pin31/GPIO6
Col1: pin22/GPIO25
Col2: pin37/GPIO26
Col3: pin35/GPIO19
Col4: pin33/GPIO13 GPIO INPUT UX1-1 ON
UX1-2 ON
UX1-3 ON
UX1-4 ON
UX1-5 ON
UX1-6 ON
UX1-7 ON
UX1-8 ON
Note
: UX1 and UX5 are dialing switches, some sensors use the same GPIO, so if you
want to use those sensors, you have to turn on the right switch, for example:
button-LEFT
using the same GPIO with the SERVO 2, if you want to use the SERVO, You can open
UX5-8, if you want to use button-LEFT , you can open UX1-8.
The CrowPi Safety Notes and warnings
Elecrow puts their customer's safety and security at the first priority, for the same reason
Elecrow doesn't use dangerous materials while manufacturing, and we follow extremely
strict QA tests to make sure the highest quality product will be shipped to our customers.
The CrowPi is a safe-to-use product with 5V input by power supply. Even though it's
completely safe to use it under normal circumstances there are a few rules that parents
should be aware of when buying this product for their children.
* Children should be under parent's supervision while using such a product, the product
contains small parts which might cause chocking to small children if swallowed.
* The relay module supplied inside our CrowPi board should
ONLY
be used within the
breadboard circuit designing, standing with 3v/5v power supply and
SHOULD NOT
under any circumstances be used / connected or wired to a 220v/110v power plug like
light bulb, air conditioner etc …
* We care about your children's eyes and health just as you do, we do not recommend
using the device in dark room with no light for safety reasons and to protect the eyes
from the light of the LED’ s and LCD display.
7