P
OOL
-S
MART
D
IGITAL
C
ONTROLLER
K
EY
The Elecro Pool-Smart has been pre-programmed with all the necessary parameters to ensure re-
liable service & operation. Below is a key explaining the controllers buttons & LED signals.
Press and hold for 2 seconds to power the control on / off.
Press to increase required pool temperature.
Press to decrease required pool temperature.
Press and release to activate / deactivate ‘Priority of Heating’
The actual pool temperature is displayed in the red upper display. The lower green display
‘required temperature’ can be selected by the user. This is the temperature you would like your
pool water to be maintained at.
Priority of Heating is a function that ensures the pool water is constantly maintained at the re-
quired temperature. When Priority heating is activated the Priority Heating Icon on the bottom
right of the display will illuminate. The control will now monitor the pool temperature, and start
both the pool circulation pump and heating process when necessary.
