Elecro Engineering Heatsmart PLUS, Инструкция по установке и эксплуатации

Страница: 15 / 21

15
7.2 Normal Operating Mode
Under normal conditions when the controller is connected and ‘On’ and flow has been detected by the flow
switch the controller display will be as shown below indicating the following information:
1.
‘Normal’
and
‘Time’
2. Actual water temperature
3. Required temperature
4.
If the Flow switch does not detect sufficient flow the message ‘ NO FLOW’
will be shown on
the Display.
7.3 Timer Mode
To activate the Timer
mode, touch the ‘M’ button key until the ‘TIMER’ symbol
is displayed (see
below)