Elecro Engineering Heatsmart PLUS, Инструкция по установке и эксплуатации

Страница: 13 / 21

13
6.6 MODBUS Setup
Refer to your BMS Management System manual for the required settings.
SET BAUD touch the
‘O.K’
button key to select,
‘MODBUS SET BAUD’
will be displayed, touch the
‘O.K’
button key
to select and
‘SET BAUD 19200 Baud’
will be displayed, touch the
‘UP’ / ‘DOWN’
button keys
for the other option
‘SET BAUD 9600 Baud’
touch the
‘O.K’
button key to select the required,
Baud rate.
Set Address
Touch the
‘UP’
button and
‘MODBUS SET ADDRESS’
will be displayed, touch the
‘UP’ / ‘DOWN’
button
keys to set the required address, touch the
‘O.K’
button key, the display will revert back to show
‘MODBUS
SET ADDRESS’
.
Set Parity
Touch the
‘O.K’
button key to select
‘MODBUS SET PARITY’
and
‘PARITY ODD’
will be displayed touch
the
‘UP’ / ‘DOWN’
button keys to change
‘PARITY ODD’
to
‘PARITY EVEN’
or
‘PARITY NONE’
touch
the
‘O.K’
button key to select the required setting, the display will now revert back to show
‘MODBUS
SET PARITY’
touch the
‘UP’
button key and
‘MODBUS EXIT’
will be displayed, touch the
‘O.K’
button
key to select
‘EXIT’
and the display will show
‘MODBUS’
. Touch the
‘UP’
button key and the display will
show
‘FACTORY’
touch again and
‘EXIT’
will be displayed, touch
‘O.K’
and the controller will exit the
‘INSTALLATION’
mode and revert to
‘NORMAL’
mode.