10
Suggested Macro Label:
PSK
Command Sequence:
Switch to Data Mode A. Switch to PSK D. Set bandwidth to 250Hz. Turn
on Fine tuning for ease of tuning. Turn on RIT so received station tuning
can be adjusted without changing transmit frequency.
Macro:
K3: MD6;DT3;IS 0600;BW0025;SWT49;RT1;
K4: MD6;DT3;IS 0600;BW0025;VT0;RT1;
General-Use Macros
Return Settings to Normal
Suggested Macro Label:
Cleanup
Command Sequence:
Exit SPLIT (transmit on VFO A). Clear any RIT setting. Clear any XIT
setting. Unlink VFOs. Turn off squelch. Set both VFOs on same
frequency. Set filter and preamp settings the same for both VFOs. Noise
blanker off. Sub receiver or dual watch off. Both VFOs unlocked.
Macro:
K3: FT0;RT0;XT0;LN0;SQ000;SWT13;SWT13;SWH58;
NB0;NB$0;SB0;LK0;LK$0;
K4: FT0;RT0;XT0;LN0;SQ000;AB3;SWH58;
NB0;NB$0;SB0;LK0;LK$0;
Enable Diversity Reception
Suggested Macro Label:
Divrsty
Command Sequence:
Clear split operation. Unlink VFOs. Unlock VFOs. Enable sub receiver.
Clear any RIT setting.
Macro:
K3: FT0;LK0;LK$0;SB1;DV1;RC;
K4: FT0;LK0;LK$0;SB1;DV1;RC;
Clear RIT
Suggested Macro Label:
RIT Clr
Command Sequence:
Clear RIT
Macro:
K3: RC;
K4: RC;
K4-Specific Macros
Please refer to the K4 Programmer’s Reference for descriptions of the commands used in these macros. These
illustrate just a few of the dozens of commands available.
Save a screen shot of the current LCD display to a USB flash drive
Suggested Macro Label:
SCRN SV
Macro:
SS0;
Toggle diversity mode and SUB RX on and off
Suggested Macro Label:
DIVSUB
Macro:
DV\;
