12
①
Take gel pads out of the bag when using the product for the first time
(Do not remove the protective film on the gel pad yet.)
②
Verify that all LED lamps have turned off and that the power to the base unit has
been shut off.
③
Securely connect the plug on a gel pad to a connection terminal on the base unit.
• Hold onto the plug and insert securely as far as it goes.
• Do not connect the product to any devices other than special gel pads.
■
When replacing a gel pad
①
Verify that all LED lamps have turned off and that the power to the base unit has
been shut off.
②
Remove the plug on gel pads from the base unit.
③
Take new gel pads out of the bag
(Do not remove the protective film
on the gel pad yet.)
④
Securely connect the plug on a gel pad to a connection terminal on the base unit.
Read the Instruction Manual of gel pads also when replacing gel pads.
2
Connecting gel pad to main unit
Preparation for Use
LED light
Off
Set dial to "○" position
CAUTION:
CAUTION:
