MAX
CUP
4
5
3
5
2
5
1
5
12
10
8
6
4
2
For proper measurements, do not under fill or over fill the measuring cup.
Make sure the ingredients are level with the rim.
Note:
The maximum capacity of the inner pot is 6L / 12 cups.
If the rice is not cooked to your liking, we recommend adjusting the ratio of
uncooked rice and water within the range of 1:1 to 1:2.
To cook porridge, use an ingredient to water ratio within the range of 1:6 to
1:7.
Add the Inner Pot to the Exterior Pot
exterior pot are completely dry before placing the
inner pot into the pressure cooker.
Gently rotate the inner pot back and forth after
insertion to make sure it is in contact with the heating
unit.
Make sure the exterior pot, heating unit, and the
Close the Cover
Make sure the seal ring is mounted on the outer edge of the aluminum
plate.
Rotate the aluminum plate gently to ensure the seal ring even contact with
the plate.
Hold the cover handle and rotate it counterclockwise until the symbol
on the cover points to the position.
Lock
Check the Exhaust Valve
Ensure the direction of the exhaust valve is rotated from
to
position
and the float valve has dropped (the float valve is dropped when the
cooker is idle.).
Ensure the exhaust valve and exhaust pipe are unclogged.
Connect to Power
Plug in the Power Cord
Insert the small end of the power cord into the female connector of the
pressure cooker and insert the opposite end of the power cord into a wall
outlet.
Make sure the power cord is firmly connected to the pressure cooker and
the wall outlet.
Power on
The device will beep and the LED screen will
display “0000” when successfully connected to
power.
The device is now in standby state. Press the
buttons on the control panel to operate the
pressure cooker (please refer to the following
section for more detailed instructions).
Boost
Pressure
Maintain
Pressure
Keep
Warm
Delay
Timer
Soup
/
Porridge
Slow
Cook
Bean
/
Chili
Cake
Rice
/
Multigrain
Meat
/
Poultry
Delay
Timer
Keep
Warm
/
Cancel
Adjustment
Time
Note:
Due to its memory function, the cooker may enter the last setting
mode automatically when powered on. Press Keep Warm/Cancel to revert to
standby state.
6
7
