7.6 Converter Studio Console
Converter Studio can be started as console application that supports both the single file converting
and the Watch Folder mode. More than one consoles can be started simultaneously.
The console binary file is located in the program installation folder. To start the console
application, click Start->Run... and type 'CMD'. In the open window type 'С:\Program
Files\Elecard\Elecard Converter Studio ProHD\csConsole.exe'.
Figure 55.
Tools – Console Converter Studio
Command line allows the work mode selection and parameter settings. The command line format
is following:
csConsole.exe /mode -i “file” -o “file” -p “profile” [/additional
parameters]
where
/mode
– Sets the application work mode:
/single
– Single File mode
/watch
– Watch Folder mode
-i «file»
– Sets the path of input file in the Single File mode or the path of source folder in the
Watch Folder mode.
-o «file»
– Sets the path of output file in the Single File mode or the path of destination folder in
the Watch Folder mode.
-p «profile»
– Sets the name of profile.
-speedquality
«name»
– Specifies the speed mode of encoding with the selected profile. If the
Elecard Converter Studio
71
User Guide