28
Purpose: Set parameters of encoding to realize high-quality playback and remote access.
Remark:
Before you start, please make sure a hard disk drive has been installed. If not,
please install one in accordance with the instructions. (Refer to 7.2.4)
(1) Independent Channel Encode
Single Channel Encode
You can set the following parameters.
● Channel: Choose channel number.
● Compression: H.264.
● Resolution: D1, HD1, CIF, QCIF.
● Frame Rate: Range 1-30.
● Bit Rate Type: VBR or CBR.
● Quality: Lowest, Lower, Low, High, Higher, Highest.
● 1 Frame Interval: Set the value according to your needs.
● Video/Audio: Turn on or off.
Remark:
● The reference range for data rate value: D1 (512~2560kbps), HD1 (384~2048kbps), CIF
(64~1024kbps), QCIF (64~512kbps).
● Turn on video and audio icon, then the recording file would be audio and video composite
streaming.