25
Step 2: Set the relevant information.
Channel: Select All; Week: Select All; Turn off Regular, open Detect; Then click OK.
Step 3: Go to Main Menu->Alarm Setting->Alarm Set.
Step 4: Click “Motion”. Select “All” channel, Toggle on “Enable”, then click “Advanced”.
Step 5: Set all relevant factors, as shown in the following content.
● Sensitivity: Sensitivity is related to the moving range and intensity of the moving subject.
The lower the sensitivity, the broader the moving range and the higher the intensity are
required for motion detection.
● Region: Click “Set”, then you can set motion detection region in the pop-up window. You
can press the left mouse or left click grids to select the region for motion detection.
● Period: Set time period for motion detection. The default value is 24 hours one day.
● Interval: During an interval, only one alert will be sent out if multiple motions are
detected.
● Record delay: Record delay refers to the length of recording video when an alarm signal is
generated. The default value is 10 seconds, and the range is 10-300 seconds.
● Record Channel: Choose the wanted channel for motion detection.
● Tour: When an alarm is triggered, the selected channel will start for a tour.
● PTZ Activation: Set PTZ activation for the camera. Select Preset, Tour or Pattern and set
the corresponding value.
Remark:
For PTZ activation, you need to go to PTZ setting (refer to 8.2.3), and set preset,
pattern, etc.
● Other: Choose the alarm mode. You have 4 options that are shown below:
