Eldom NU6, Инструкция по эксплуатации, Страница: 8 / 21

8
Trouble Possible reasons Shooting Way
LED display is off
LED display is on,
no mist no wind
LED display is on,
no mist but with wind
LED display is on,
with water
but shows waterless
Abnormal noise
Mist coming out
around the nozzle
Display shows blinking
digital 30%RH
Water doesn’t come
down to basin (2)
Backup by filter
Rinse the filter by tap water
Current humidity level
is lower than 30%
Just keep it working
There are apertures between
the nozzle and water tank
Dip the nozzle in water for
a while and then fix it
to the socket on water tank
Resonant in water tank when
water is too low
Unit is on a unstable surface
Fill water tank with water
Move the unit to
a stable flat surface
No power supply
Not press ON
Connect power supply
Switch on
Too much water
in the water basin (2)
No water in water tank
Fill water into water tank (3)
Mist output is set
on the lowest level
Floater is interrupted (fig. 03)
Waver the floater,
keep it free
Adjust the mist output
Pull out some water from the
water basin,
closed the cover of water tank tightly.
TROUBLE SHOOTING GUIDE
Any trouble found in normal operation, please kindly refer to the following points:
- the appliance is made of materials which can be reprocessed or recycled,
- it should be handed over to a relevant point which deals with the collection and recycling
of electric and electronic appliances.
ENVIRONMENTAL PROTECTION
WARRANTY
- the appliance is intended for a private use in a household,
- it cannot be used for professional purposes,
- the warranty is invalid in the case of improper operation.