Eldes EWR2, Руководство пользователя

Страница: 12 / 14

12 12 EN EWR2 Wireless Signal Repeater v1.1
Updating the Firmware via USB Cable
1. Remove 1 battery and disconnect the power supply.
2. Short circuit (connect) FW pins (this method is valid only for hardware version older than v.6).
3. Connect the device via USB cable to the PC.
4. The new window must pop-up where you will find the .bin file. Otherwise open My Computer and look for CRP DISABLED drive.
5. Delete the .bin file found in the drive.
6. Copy the new firmware .bin file to the same window.
7. Unplug USB cable.
8. Firmware updated.
Restoring Default Parameters
1. Remove 1 battery and disconnect the power supply.
2. Press and hold the reset button.
3. Connect the external power supply or USB cable to the PC.
4. Wait until the RED LED indicator quickly flashes several times.
5. Release the reset button.
6. Parameters restored to default.