Eldes EWK2, Руководство пользователя, Страница: 4 / 8

44 EN EWK2/EWK2A Manual v.1.2
4. Insert the CR2032 type battery provided in the EWK2/EWK2A package. Before inserting the battery, ensure that it is positioned plus-
marked side up.
5
5. Insert the PCB back to the enclosure and close it.
6 7 8
6. Pair the device with the alarm system using ELDES Configuration Tool software. Open Wireless Device Management section and
enter a 8-digit wireless device ID located on the EWK2/EWK2A enclosure and press Add button. The device can also be paired by send-
ing a corresponding command via SMS message. For more details, please refer to the software‘s HELP section and ELDES alarm system
installation manual.
9
7. Press the keyfob button (any button on EWK2) several times until the device is successfully paired. Upon the successful pairing pro-
cess, the message indicated next to EWK2/EWK2A device icon will turn to CONNECTED .
8. EWK2/EWK2A is ready for use.
10
NOTE: If you are unable to pair the wireless device, please restore the parameters of the wireless device to default and try again (see
chapter 6. RESTORING DEFAULT PARAMETERS ).