Eldes EWK2, Руководство пользователя, Страница: 2 / 8

22 EN EWK2/EWK2A Manual v.1.2
User manual v1.2
EWK2 compatible with:
• ESIM264 v7.14.00 and up + EWT1 v16.18 and up.
• ESIM364 v02.04.10 and up.
• EPIR2 v01.01.08 and up.
• EPIR3 all versions
EWK2A compatible with:
• ESIM364 v02.10.03 and up.
• EPIR2 v01.02.00 and up.
• EPIR3 v01.03.00 and up.
Main features:
• Alarm system arming & disarming;
• Panic button;
• PGM output control;
• Visual and audio indication of command status.
EWK2/EWK2A is a wireless device intended to remotely arm and disarm ELDES alarm system, cause system alarm (Panic Button) or to
control any electric appliance connected to the alarm system’s PGM output. In order to start using wireless keyfob EWK2/EWK2A, it has
to be paired with ELDES wireless alarm system using ELDES Configuration Tool software or sending a corresponding SMS text message.
EWK2 keyfob features four configurable buttons intended to operate according to individual needs,while EWK2A keyfob model features
one configurable button. After the button is pressed, EWK2/EWK2A internal buzzer’s sound signal and red LED indicator confirms a trans-
ferred command to ELDES alarm system via wireless connection. The status of the sent command can be checked by attempting to receive
the feedback signal from the alarm system. This can be performed by pressing down the same button again and holding it for 3 seconds. 3
short sound signals and LED indicator flashes indicate a successfully carried out command, while 1 long beep and LED indicator flash stands
for failed command and feedback signal failure. By default, one pair of buttons is already configured to arm and disarm the alarm system.
It is possible to connect up to 5 EWK2/EWK2A devices to ELDES alarm system at a time. The maximum wireless connection range is 150m
(492.13ft) (in open areas).
NOTE: For complete information on device operation with ELDES alarm system, please refer to ELDES alarm system installation
manual located at www.eldes.lt/download
1. CONTENTS OF PACK
Item Quantity
1. EWK2/EWK2A........... ............................................ 1
2. CR2032 3V lithium battery.................. ............... 1
3. User manual......... ................................................. 1
4. Keychain .................................................................. 1
2. TECHNICAL SPECIFICATIONS
1
Optional
functionality
Optional
functionality
Disarm the
system
Arm the
system
LED
indicator
LED
indicator
EWK2 EWK2A
Panic button
NOTE: The picture above reflects the default EWK2/EWK2A button configuration. All keyfob buttons are configurable according to individ-
ual needs.