rating.
7. Verify that the selected charging curve is suitable for the type of battery to be
recharged.
8. In order to avoid voltage drop, the output cables must be as short as possible, and
the diameter must be adequate for the output current.
9. Do not try to service the battery charger yourself. Opening the cover may expose
you to shock or other hazards.
10. If the battery charger does not work correctly or if it has been damaged,
unplugged it immediately from the supply socket, from the battery and contact a
retailer.
11. In the case of thermal compensation for the battery voltage, it is necessary to
place the thermal sensor in the area of the highest battery temperature, such as
between 2 batteries near the center of the pack.
Attentions
To reduce the risk of electric shock, do not remove cover. Refer servicing to
qualified service personnel. Disconnect the mains supply before connecting or
disconnecting the links to the battery. Read the instruction manual carefully before
use. Verify that the selected charge curve is suitable for the type of battery you have
to re-charge.
Mechanical Dimensions
All dimensions are expressed in mm
4
