30
UTIL
(UTILITIES)
AUTO
FIND
Automatically locates the detection point if the
measurement is out of the viewable display area.
SCAN MODE
Enables a high speed scan mode that increases the sam-
ple rate to 32 measurements per second.
ALARM STA-
TUS
Toggles alarm mode on, off, or audible.
ALARM LO
LIMIT
Sets the LO (Low) limit parameter. If the measurement
falls below this value, a red light will illuminate and the
alarm will sound.
ALARM HI
LIMIT
Sets the HI (High) limit parameter. If the measurement
exceeds this value, a red light will illuminate and the alarm
will sound.
XFER
(TRANSFER)
BACKUP SET-
UPS
Allows you to backup the setups currently stored in your
gauge to a computer via the RS232 port.
RESTORE
SETUPS
Allows you to restore setups saved on a computer to your
gauge via the RS232 port.
BACKUP GRID
Allows you to backup grid files stored in your gauge to a
computer via the RS232 port.
RESTORE
GRID
Allows you to restore grid files saved on a computer to
your gauge via the RS232 port.
ABOUT
Provides Elcometer NDT contact information and your
gauge software version.
Refer to the help section of your gauge NDT Link software
for a complete electronic manual covering data transfer.
Menu
Function
Description
