ELCOM Uniq PC 150, Руководство пользователя

Страница: 36 / 48

Switching on
The equipment is switched on by pushing the POWER button on the side panel. The LED indicator will light
up and the installed operating system will be launched (Fig. 1.1).
Note : For OS Linux CentOS 5.5 is pre-defined user, username: elcom , password: elcom
(root has password elcom123)
Switching off
The equipment can be switched off using the standard operating system procedure, or by pressing the
POWER button (OS Windows, Linux) (Fig. 1.1).
restarting
If an emergency restart of the equipment is required, press RESET (Fig. 1.1).
CalIbratION OF thE tOUChSCrEEN PaNEl
Upon first use of the equipment it is necessary to calibrate the touch screen display. It is also necessary to
calibrate the display in cases involving a shift in the calibration points. You can arrive at the calibration of
the touch screen display through:
OS Windows:
Start - PrOGraMS - tOUChKIt CONFIGUrE UtIlIty
OS Linux CentOS: SyStEM - aDMINIStratION - tOUChPaNEl CalIbratION
At which point a window will open showing the different settings tabs. Select the tab “Tools“ with the follow-
ing to fig.2.1.
Figure 2.1 tab for setting the calibration
36
Handling the equipment
&/(-*4)