ELCOM TDC-5000, Руководство пользователя

Страница: 21 / 25

Attaching to the STDC-5000 stand
The TDC-5000 PC can be attached using a standard VESA 75 interface to a variety of stands and thus can
be placed in a place of your choice, which allows for comfortable operation. Fig. 4.1 shows an image of its
connection to the STDC-5000 stand along with an external EK-5000 keyboard. You’ll find information about
additional possibilities for attaching the device on our Web site at www.elcom.eu.
Figure 4.1. Assembly of the TDC-5000 display on the VESA stand.
Note: When mounting and using the device take care that the ventilation openings in the lower part (from
below around the connectors and from above) are not covered or blocked with dust, pollutants or
any foreign objects. Insufficient circulation of air could result in overheating.
Care
Prior to cleaning the device, always switch it off and disconnect it from the power source.
For cleaning the external cover use a moderately damp (not wet!) towel made of soft fibers. Do not use caustic
cleaning agents or solvents as they can cause damage or discoloration of the cover’s plastic casing.
For cleaning the surface of the display (the touch panel) use a dry cloth. If the display is markedly dirty, a
small amount of a quality product for cleaning LCD displays on the dry dusting cloth. Never apply cleaning
solutions directly onto the display.
Prevent the penetration of fluids to the inside of the device as they can cause damage to it.
46
Mounting and care
ENGLISH