ELCOM Euro-2100, Руководство пользователя

Страница: 31 / 68

Programming manual
Euro-2100 © Elcom, s. r. o.
31
Maximum stock value is 999,999.999. If
you enter integer amount, enter the num-
ber and just press
. After pressing any of
the above three keys, the ECR will conti-
nue with programming of the stock for the
next PLU.
4) Press ( Total ) to finish the quick PLU
stock programming.
Correction of programmed PLUs
1)Switch the ECR to “P” mode by pressingw
%
.
2) Enter the PLU number and press the
( PLU ) button. You can analogously use the
bar-code scanner: if you are outside PLU
name programming, scanning the bar-code
will jump to the said PLU.
3) Continue programming the PLU values as
described in the relevant section.
4) You can print out all programmed PLUs
by pressing ( Check ) key or you could
print out the currently programmed PLU
by pressing
( EAN ) key.
5) You can jump to any PLU using the pro-
cedure in step 2). Press ( Total ) key to
finish correcting the PLUs.
Printing the programmed PLUs
To verify programmed values, print them by
pressing the
( Check ) key in the PLU
programming mode. If the cash register is in
root programming mode, press the
( PLU )
key and then the . ( Check ) key. Only PLUs
that have been programmed will be printed. It
is possible to print the programmed value of a
particular PLU by pressing
( EAN ) key.
Programming the euro currency
The Euro-2100 allows you to use the euro cur-
rency. Because of the stage of the euro currency
implementation, it is also possible to register in
the national currency (stage no. 1 and no. 2) or
in a foreign currency (stage no. 3). Registration
with the euro is divided into four stages:
Stage without euro currency
The cash register works without the Euro. All
transactions are performed in the national cur-
rency.
First euro currency stage
In the first euro stage the master currency is
the national one, the secondary currency is the
euro. The customer can pay either in the natio-
nal currency or in euro. Going back to the sta-
ge without euro isn’t possible without resetting
the ECR. Call your service technician.
Procedure for entering the first euro
stage:
1) Switch the ECR to “P” mode by pressing
%
.
2) Enter the code by pressing
.
3) Enter the acronym for the national curren-
cy (three characters maximum) and press
( Subtotal ) key.
4) Enter the exchange rate for euro (eleven
digits maximum, with four decimals); mi-
nimum rate is 0.000 1 and maximum is
10,000. Press
( Subtotal ) key.
5) Enter the currency flags (two digits). First
digit determines to how many decimal pla-
ces amount in euro will be displayed. Second
digit determines to how many decimal pla-
ces will the price in euro be rounded.
After programming, the information on tran-
sition into first stage of euro currency is dis-
played. The same information is also printed
out along with information on values entered
during the transition.
During the first euro stage the actual exchange
rate can be set by the following procedure:
1) Switch the ECR to “P” mode by pressing
%
.
2) Press the ( Drawer ) key.
3) Enter the current euro exchange rate and
press ( Subtotal Total ) key sequence.
Second euro currency stage
In the second euro currency stage the master
currency is euro, the secondary one is the nati-
1EUR=1GBP
Curr. rate