ELCOM Euro-2100, Руководство пользователя

Страница: 15 / 68

Cash register characteristics
Euro-2100 © Elcom, s. r. o.
15
The displays fully support national characters (if
needed) and allow also other characters (as nu-
merals and special characters). It‘s easy and com-
prehensive to read from this type of display.
The customer display has back-light installed
by default.
Customer display description
ims responsibility for the transactions. The
name of the logged-in cashier, is printed on
each receipt header. The transactions are recor-
ded in the cashier’s account and are displayed
in the cashier’s report. In the void mode (R or
T) this button functions as arrow up or jump
to the previous item. It is also used to evoke the
cashier report in “X” mode and for the cashier
programming in “P” mode.
The Paper feed button shifts the receipt
ribbon without printing. The receipt ribbon is
fed in 1,5 cm by pressing this button.
Pressing the Receipt button in “T”
and “R” mode allows you to switch the receipt
printing on and off. The printing switched off
is signalled by characters “Prn”.
The Multiply button is utilized for mul-
tiplication if two or more pieces of the same
item are being sold. It used for displaying the
time in the registration mode. It is also used to
activate the backlight activation in “X” mode.
The Price button enables manual entry
of an item price rather than the preprogram-
med PLU or DPT price. It is also used for fast
PLU price programming in “P” mode.
The PLU button ( price look-up ) makes
it possible by means of the PLU code to call
out the programmed data about an item, price,
name, department, VAT, etc. See PLU transac-
tions. It evokes a PLU report in “X” or “Z”
mode. It is also used for PLU programming in
“P” mode.
The Mode button is used for switching
into the individual modes of the cash register. Exit
the STANDBY mode by pressing this button.
After finishing a transaction, print
out the same receipt again by pressing Dupli-
cate button. The receipt is denoted “DUPLI-
CATE”.
The Credit button is used to finalize
the sale in case of credit card payment.
The Check button is used to finalize the
transaction in case of check payment. It also
evokes a financial report in “X” mode and is
used for the programmed data printing in “P”
mode.
a These two buttons are
used to add the percent add-on or to subtract
the percent discount for a particular item or
for the complete transaction according to the
programmed values. The percent add-on but-
ton
is also used for sales units program-
ming in “P” mode. The percent discount but-
ton (shift+cr) is also used for expended flags
programming.
The Subtotal button displays and
prints the actual subtotal value according to the
setting of the fourth system flag.
15-12-2005
P
11:07:39
< Figure 2.5
Alphanumeric
LCD display.
The Total / Cash button is used to finalize the sale in case of cash payment. It also evokes
a daily report in “X” or “Z” mode.
The function in an upper part of a key is
chosen by holding the Shift button and then
pressing the key with two functions
Cashier display description
The cashier display of Euro-2100 is a colour al-
phanumeric LCD display with 36 characters.
The high quality of display, its contrast and
brightness are result of black mask technology.
This type of display complements the unique-
ness of the Euro-2100 cash register. For impro-
ved readability, the display is divided into three
groups: the article name (first row, twenty cha-
racters), amount and type of article (second
row, six characters) and finally the article price
(second row, ten characters). The visibility of
displayed data is also enhanced by the special
green-white colour combination for characters
and by using two character sizes.
ECR displays description