ELCOM Euro-200T, Руководство пользователя

Страница: 86 / 92

86
Helpful advice
Message Meaning
100%
No external power supply is connected. The power supply is internal accumula-
tor. The percentage value indicates the status of internal accumulator charge.
ADD ON - DISCOUNT LIMIT OVER Add on or discount amount limit over. Check the system flags.
ADD ON - DISCOUNT
TO NEGATIVE VALUE
Add on or discount to negative amount disabled.
ADD ON - DISCOUNT
TO RETURNABLE PACKS
Add on or discount to returnable packs disabled.
AMOUNT DUE Information about amount that has to be paid for sale finish.
BAR CODE DUPLICATE Bar code is assigned to another PLU.
CARD NOT ACCEPTED Credit card not accepted during EFT terminal payment.
CODE SORTING ECR sorts programmed bar codes.
COMMUNICATION ERROR Communication error between ECR and PC or EFT terminal.
CONTINUE ON SALE ECR is ready to continue on sale.
CREDIT CARD PAYMENT LIMIT OVER Credit card payment limit is over.
DATE ERROR Incorrect date entry.
DATE REVERSE ORDER Incorrect date entry.
DECIMAL PLACES
LIMIT OVER
Second system flag disables sale with more decimal places.
DPT INACTIVE Sale through this DPT is forbidden.
DUPLICATE PRINT The printing of duplicate of last receipt.
ECR -- PC The communication between ECR and PC is running.
ECR AFTER REPORT No sale from daily (total) report execution.
ENTER SERVICE CODE Unblocking programming mode can be done only by entry of service code.
ENTER THE AMOUNT
OF CUSTOMER CASH
Enforced entry of customer cash before sale finishing.
ENTRY ERROR Unexpected entry. Incorrect sequence of keys pressed.
FINISH PURCHASE
Maximum count of PLU in a sale has been reached (100), or maximum count
of lines in one receipt has been reached.
FLAG ERROR Incorrect flag entry.
FORBIDDEN ENTRY
OF RETURNABLE PACKS
Operation of bottles not can be performed.
GT LIMIT OVER
EXECUTE REPORTS Grandtotals reached the maximum amount. Execute daily (total) and periodical
report. Call your service technician.
GT NEGATIVE VALUE Performed operation caused negative Grandtotal.
HEAD OVERHEAT
Information on the thermal head overheat. Wait a moment until normal con-
dition returns.
HEAD UP POSITION The thermal head is in an up position. Move it down to enable printing.
ILLEGAL EURO PHASE Access is not possible to this Euro phase.
INFORMATION AND ERROR MESSAGES
If it is necessary to inform the operator on the current status of the ECR, or the ECR is in error state, the error
messages shown in table 8.1 are displayed.
Figure 8.1 - List of ECR messages