ELCOM Euro-200T, Руководство пользователя

Страница: 37 / 92

37
Programming manual
3) Continue re-programming desired values as shown in the section above.
4) You can print out all the programmed department values by pressing

( C
HECK
) key; to print out
the currently programmed department, press

( EAN ) key.
5) Finish the corrections by pressing

( T
OTAL
) key.
Department values print out
Check the programmed department values by pressing the  ( C
HECK
) key in the department program-
ming mode. In the programming mode, press the direct button of a department or a department number
and then press the
h
( DPT ) button. Afterwards press the  ( C
HECK
) button. To print the settings of
currently programmed department, press the

(EAN) key.
SALE UNITS PROGRAMMING
Sale unit can be assigned to each PLU and represents the unit in which the PLU is sold. It is possible to
program eight sales units with up to three characters each. Figure 3.17 shows the default settings for sale
units; you can adjust these defaults to your needs.
Sale units programming procedure:
1) Switch the ECR to the “P” mode by pressing

.
2) Press the

( S
URCHARGE
) key. The ECR display shows the current sale unit number along with
the label (“
sale unit
”) in the second display row and programmed unit in the first row.
3) Enter the text for the current sale unit (up to three characters). You can correct mistypes by pressing

( C
LEAR
) key. See the section on entering texts at the end of this chapter.
Figure 3.17. Default sale units.
Digit Units Digit Units
1 5 m
2 PCS 6 m
2
3 kg 7 btl
4 l 8 pkg
4) Press

( S
UBTOTAL
) key to continue sale units programming with the next sale unit. Finish sales unit
programming at any time by pressing the

( T
OTAL
) key.
Programmed sale units correcting
1) Switch the ECR to the “P” mode by pressing

.
2) Enter the number of the sales unit you want to modify and press

( S
URCHARGE
) key.
3) Continue the programming as described in the previous section (see above).
4) You can print out all programmed sale units by pressing

( C
HECK
) key; to print the currently pro-
grammed sale unit, press

(EAN) key.
5) Finish the corrections by pressing

( T
OTAL
) key.
Sale unit settings print out
If you want to check the settings of the sale units, press the

( C
HECK
) key in the sale units programming
mode. If the ECR is in the programming mode, first press the

(Surcharge) key, then the

( C
HECK
)
key. For a printout of the current sale unit, press the

(EAN) key.
PCS
2
sale unit