elco VL 2.120 D, Руководство по эксплуатации

Страница: 24 / 28

11/2010 - Art. Nr. 4200 1029 8600A 24
Maintenance
Fault diagnosis menu
Operating statistics menu
Fault diagnosis menu
To access the fault diagnosis menu, press any button when the burner is ready to operate, when
the burner is in operation, or when it is in malfunction mode. It is not possible to access the fault
diagnosis menu during the start-up phase.
The general menu screen will appear. Using the buttons
, , , or , place the cursor on
the fault diagnosis menu symbol, and confirm using the button .
The details of the last fault to appear are indicated by the flashing symbol. The flame intensity,
network voltage, air flap position, number of burner start-ups as well as the operating time of the
burner at the time it switched to malfunction mode are displayed underneath.
Using the buttons and , it is possible to call up the details of the last 5 faults to have
appeared (the fault number is displayed in the upper left corner of the display). After the details
of the last 5 faults, the telephone number of the after-sales department as well as the
maintenance contract number are shown (no values are entered in the factory).
• Quit the menu using the button
Entering a telephone number for the maintenance company and the maintenance contract
number
When the corresponding symbol appears on the display:
• Keep the button
held down until the first figure starts to flash (a short press will exit the
menu).
• Using the buttons or , change the figure to the value required (underscore = empty field)
• Using the button , move on to the next figure.
• When the number is complete, save using the button .
Operating statistics menu
To access the operating statistics menu, press any button, when the burner is ready to operate,
when the burner is in operation, or when it is in malfunction mode. It is impossible to access the
operating statistics diagnosis menu during the start-up phase.
The general menu screen will appear. Using the buttons
, , , or , place the cursor on
the operating statistics menu symbol, and confirm using the button .
The operating statistics menu comprises 7 screens. Navigation between the different screens is
done using the buttons
and .
- Flame detection time for last start-up
- Average flame detection time for the latest 5 start-ups
- Total number of burner start-ups
- Total number of faults
- Total number of operating hours
- Total number of operating hours in 2
nd
stage