elco VL 2.120 D, Руководство по эксплуатации

Страница: 2 / 28

11/2010 - Art. Nr. 4200 1029 8600A 2
Overview
Contents
Overview Contents.................................................................... 2
Important information ................................................ 2
Burner description..................................................... 3
Operation Operating mode, safety function ............................... 4
Automatic combustion control unit ......................... 5-7
Terminal allocation chart, connection
socket..................................................................... 8-9
Fuel oil burner pump ............................................... 10
Assembly Installing the burner, burner installation location..... 11
Electrical connection, fuel oil connection ............... 12
Commissioning Checks before commissioning ................................ 13
Setting data, checking combustion
components ............................................................ 13
Air regulation, fuel oil pressure regulation............... 14
Adjusting burner output...................................... 15-20
Maintenance Servicing ............................................................ 21-22
Troubleshooting ...................................................... 23
Fault diagnosis menu.............................................. 24
Operating statistics menu .................................. 24-25
We accept no responsibility for
damage arising from:
- inappropriate use.
- incorrect installation and/or repair on
the part of the buyer or any third party,
including the fitting of non-original
parts.
Final delivery and instructions for
use
The firing system fitter must supply the
operator of the system with operating
and maintenance instructions on or
before final delivery. These instructions
should be displayed in a prominent
location at the point of installation of the
heat generator, They should include the
address and telephone number of the
nearest customer service centre.
Notes for the operator
The system should be inspected by a
specialist at least once a year.
Depending on the type of installation,
shorter maintenance intervals may be
necessary! It is advisable to take out a
maintenance contract to guarantee
regular servicing.
Important information
The VL 2.120 D, VL 2.160 D and
VL 2.210 D burners are designed to
burn extra light fuel oil in accordance
with national standards:
AT:
ÖNORM C1109: standard or low
sulphur
BE: NBN T52.716: standard or NBN
EN590: low sulphur
CH: SN 181160-2: extra-light fuel oil
and low sulphur eco fuel oil
DE: DIN 51603-1: standard and low
sulphur.
The design and function of the burners
meet standard EN 267.
Installation, commissioning and
maintenance must only be carried out by
authorised specialists and all applicable
directives and regulations must be
complied with.
Burner description
The VL 2.120 D, VL 2.160 D and
VL 2.210 D burners are two-stage fully
automatic monoblock devices. They are
suitable for use with all heat generators
complying with standard EN 303 or for
use by hot air generators complying with
DIN 4794 or DIN 30697 within their
respective performance range. Any
other type of application requires the
approval of ELCO.
Packaging
The burner is supplied packaged in two
boxes on a pallet:
- Burner housing with operating
instructions, wiring diagram.
- Burner head with flange seal and
securing screws.
The following standards should be
observed in order to ensure safe,
environmentally sound and energy-
efficient operation:
EN 226
Connection of fuel oil and forced-
draught gas burners to a heat generator
EN 60335-1, -102
Safety of electrical equipment for
domestic use
Installation location
The burner must not be used in rooms
with aggressive vapours (e.g. hair spray,
tetrachloroethylene, carbon
tetrachloride), high levels of dust or high
air humidity (e.g. laundry rooms).
If no connection to an air exhaust
system is provided for the air supply,
there must be a supply air inlet
measuring:
DE: up to 50 kW: 150 cm
2
per additional kW: : + 2.0 cm
2
CH: QF [kW] x 6= ...cm
2
; but at least
150 cm
2
.
Variations may arise as a result of local
regulations.
Declaration of conformity
for fuel oil burners
We, certified company No.AQF030,
F-74106 ANNEMASSE Cedex, declare
under our sole responsibility that the
products
VL 2.120 D
VL 2.160 D
VL 2.210 D
conform to the following standards
EN 50165
EN 55014
EN 60335-1
EN 60335-2-102
EN 60555-2
EN 60555-3
EN 267
Belgian royal decree dated 08/01/2004
These products bear the CE mark in
accordance with the stipulations of the
following European Directives
2006/ 42/EC
Machinery directive
2004/108/EC EMC directive
2006/ 95/EC Low voltage directive
92/ 42/EEC EEC Working
efficiency directive
Annemasse, 26th March 2010
M. SPONZA