background image

Trispace AR Floor Standing Shell and TubeBoiler 

 

11                                                                           L360                                            

©

MHS Boilers 06/09/2013 

 

13  CLEANING  

  

Before cleaning operations make sure that:  
  
-  the main switch on the control panel has been turned off (OFF); 
  
-  the boiler isolation switch has been turned off.  
  
The user should only clean the outside casing of the boiler using a wet cloth with soap.  
  
If  the  dirt  is  particularly  difficult  to  remove,  soak  with  water  and  methylated spirit.  Do not use abrasive 
sponges or products and do not clean with jets of water.   
  

14  MAINTENANCE  

  

Periodic maintenance and measurement of the combustion efficiency are required and the person in charge of 
the heating system must ensure that these checks are carried out by professionally qualified personnel.  

  

15  PRODUCT RECEIPT  

  

The TRISPACE AR boilers are delivered as described below:  
  
1 x boiler body (inside the combustion chamber are the instrument panel box containing the documents, the 
       mineral wool for insulation of the boiler and the ceramic fibre mat for plugging the burner draught tube 
       void. 
  
1 x cardboard box containing the casing panels.  
  
The  boiler  must  be  handled  by  means  of  the  lifting  eyebolts  using  suitable equipment.   
  
In view of the weight of the boiler, you are advised not to attempt to move it manually. 

 

 

Содержание MHS Boilers Trispace AR 135



























Отзывы: