Compact67-Slim EtherCAT I/O Block – Slim M8
21 / 28
4.3 Module Startup Process
Check whether the following requirements for startup Compact67_Slim
distributed I/O module system are met:
Compact67_Slim power, bus and signal wired.
The module address is set by software.
Compact67_Slim is configured and downloaded into the controller.
Supply voltage for controller is switched on.
Startup of Compact67_Slim:
Switch on
If Ui green
Check power polarity
and undervoltage
N
Y
Link red
Receiving configuration data
Confi. correct
Y
Link green
N
Double check
