ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 8/2100
PAGINA 5 DI 9
NOTE:
This charger is delivered with two detachable battery
connection sets.
If You want charge using the connection set with
the battery clamps, first disconnect and remove
the battery from the vehicle and place it in a well
ventilated area.
The connection set with the eyelets allows convenient
quick connection/ disconnection of the charger to the
battery when the vehicle is garaged.
The eyelets of the other connection set can be
permanently attached to the battery posts by fixing
them firmly through the holes in the posts with
galvanized bolts and nuts.
The eyelet on the lead with the RED lug must be fixed
to the positive pole (marked Pos or “P” or + and often
red) and the other lug to the negative pole (Neg or “N”
or – and often black).
Ensure that the 2-pin connector is situated away from
the battery and restrained so as not to come into
contact with any moving part of the vehicle.
Prevent entry of damp and dirt to the 2-pin connector.
If in any doubt concerning any of the above
instructions, consult a professional service agent for
assistance.
This Intelligent Battery Charger is based on
microprocessor for all types of rechargeable 12V
lead-acid batteries:
- filler cap types;
- all types of AGM "MF";
- valve regulated(VRLA)
- GEL-electrolyte types.
- For automobiles and other vehicles.
DO NOT use to charge NiCd or NiMH batteries.
TECHNICAL SPECIFICATIONS:
Input Voltage: 100~120 AC or 220~260 AC, 50/60Hz
Current: Max. 0.5A
Output Voltage: Max.14.4V or 14.7V
Current: Max.4.0A
Battery Range: 2.3Ah-120Ah
IP Level: IP65
LEDS INDICATOR:
Power On: Power supply indicator
Charge: Battery being charged indicator
Reverse: Incorrect polarity indicator
Weak: Bad battery indicator
Ok: Battery being charged fully
Recovery: Recovery in progress indicator
FEATURES:
1) Switched Mode Power Supply.
2) The charger will automatically adjust the charging
current according to the battery's capacity rating.
3) The charger will diagnose and try to recover the
sulphated batteries. It can recover high resistance
caused by sulfation which the conventional charger
is not able to perform.
4) The charger is able to check and indicate weak or
damaged battery.
5) The charger will automatically cut off when the
battery is charged fully and resume charging when
the battery's voltage is lower. Hence, it's safe for
long term connection to maintain battery without
damage.
6) Polarity Reverse Protection, Short Circuit
Protection, Over Temperature Protection,Over
Current Protection, Over Voltage Protection, Free
Spark.
USER INSTRUCTIONS:
1) Connecting with the battery. Important Note!
During recovery mode for deep discharged
batteries the charger will increase it's output
voltage. To prevent risk of damaging vehicle
components we recommend the battery is removed
from the vehicle.
2) Connect the Red clip or eyelet to the Positive
terminal which is usually ´ or marked
in RED Connect the Black clip or eyelet to the
Negative terminal which is usually marked ´-´ or
marked in BLACK;
3) The "Power On" LED Green should illuminate
when connecting with the power supply.
NOTE!
If the Reverse LED Red illuminates, please
reverse the battery connections.
4) The "Recovery" LED Blue will illuminate if the
battery's voltage is very low when connected, and
the charger will try to recover the battery.
5) The "Charging" LED Orange will illuminate if the
recovery is successful, and the process of charging
will be at normal. The "Recovery" LED Blue will
blink if the recovery is failing. Please replace the
battery.
6) The "Charging" LED Orange will illuminate while
the charger in the process of charging. The charger
will charge the battery at Constant Current until
the voltage reach the Constant Voltage and then
automatically switch to floating mode and maintain
the charging at the Constant Voltage.
NOTE!
If the battery's voltage is very low, the charger
will not function and the "Charging" LED Orange
will not illuminate.
7) The "OK" LED Green will illuminate when the
battery is charged fully.
8) While the charger is still connected with the battery
and the battery's voltage drops lowerly, the charger
will automatically restart charging the battery with
the "Charging" LED Orange illuminating.
9) The "Weak" LED Red will illuminate if the battery's
