ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 09/08550-00
PAGINA 4 DI 6
ART. 09/08550-00 NI 7010
Smart DIGITAL AC CLAMP METER
Operation Manual
Contents:
1.1 Preparation ................................................................................... 4
1.2 Symbols ........................................................................................ 4
1.3 Maintenance ................................................................................. 4
2. Description
........................................................................................ 4
2.1 Component name ................................................................... 4
2.3 LCD monitor ............................................................................ 4
3. Specification
..................................................................................... 5
3.1 Overview ................................................................................. 5
4. Operational guidelines
..................................................................... 5
4.1 Reading hold ........................................................................... 5
4.2Backlight .................................................................................. 5
4.3 auto shutdown ......................................................................... 5
4.4 Preparation for measurement ................................................. 5
4.6 Measurement of AC current and AC current frequency .......... 6
4.7 AC voltage measurement ....................................................... 6
4.8 DC voltage measurement ....................................................... 6
4.9 Electric resistance measurement ............................................ 6
5. Maintenance
...................................................................................... 6
5.1 Battery replacement ................................................................ 6
5.2 Replacement of test leads ...................................................... 6
6. Accessories
...................................................................................... 6
1. Safety information
Warning
Please operate this instrument with great care. Improper
operation may result in an electric shot or damage to the
instrument. Throughout the operation, you should follow the
generally accepted safety procedures and take the safety
measures as required by the Operation. Please read carefully
this Manual and take the operational methods as specified
herein so as to make full use of the instrument’s functionalities
and ensure safe operation.
This instrument is in strict compliance with the safety requirements as
specified in IEC-61010-1, IEC-61010-2-030 and IEC-61010-2-032 for
electrical measuring instruments. Its pollution reaches the level of Class
II and over-voltage standard is CAT III 600V.
Please strictly follow the guideline for safe operation so as to ensure
safety while operating this instrument.
1.1 Preparation
1.1.1 The user must observe the standard safety rules when operating
this instrument:
-General protection against electrical shock
-Prevention of unintended use
1.1.2 Upon the arrival of the instrument, check any damage that arises
during transportation.
1.1.3 Upon the arrival of the instrument that has been stored and
shipped in rough conditions, check and identify any damage.
1.1.4 The instrument must be kept in a good condition. Prior to its use,
check the possible damage to insulation part and potential exposed
metal wire of the lead.
1.2 Symbols
Note (For important safety information,
see Operation Manual)
This symbol indicates that it can be used on a hazardous
live conductor.
Double insulation protection (Category II)
CAT III Refers to over-voltage level III (installation) as specified in
IEC-61010-1standard. Pollution level 2 refers to the level of
impulse withstand voltage protection.
It is compliant with appropriate EU standard.
Grounding
1.3 Maintenance
1.3.1 Do not attempt to open the bottom case to adjust or repair
instruments. Such operation can only be executed by an electrician who
is fully familiar with the instrument and electric shock risks.
1.3.2 Remove the test leads from the line to be measured, before opening
the instrument’s bottom case or battery cover
1.3.3 To avoid an electric shock that results from any false readings,
replace existing battery when the symbol is displayed.
1.3.4 Don’t use any abrasive agents or solvents when a wet cloth and
mild detergent are being employed to clean the instrument.
1.3.5 Power off and keep the range switch to the position “OFF” when the
instrument is not in use.
1.3.6 Remove battery to avoid any damage to the instrument when the
instrument is not in use for a long period.
2. Description
2.1 Components
1. Non-contact voltage detection area
2. Data hold/Backlight key
3. Hz/NCV key
4. Display screen
5. Input socket
6. Power key
7. Trigger
8. NCV/On/Off indicator
9. Current clamp head: for current measurement
2.2 LCD monitor
~
AC & DC
On/Off indication
AUTO
Auto scan mode
auto shutdown indication
LOW BATTERY
H
Hold status
V;A
Volt (Voltage); Ampere (Current)
Ω; kΩ; MΩ
Ohm, kilohm and megohm (Resistance)
Hz
Hertz
NCV
Non-contact voltage detection
