playback halts, leaving the DMX signal as it was at the
moment of STOP.
Loop
Plays the show in repeat, starting again after finishing. The
STOP function is as in PLAY. From PLAY one can change
over to LOOP by depressing the LOOP button and back to
PLAY again via PLAY. In this case the show will play till the
end and stop then.
Record Inhibit (Play Only)
To protect the unit from re-recording a file by non qualified
people the
miniSTORE
can be set to a safe mode via the dip
switches at the back: 3 to
↓
and 4 to
↑
. In this case only the
PLAY, LOOP and STOP buttons are available.
Control by external contact closure
Instead of using the buttons at the front the
miniSTORE
can
also be put into PLAY by an external contact. This setting can
be made via the dip switches: 3 to
↑
and 4 to
↓
. In this mode
the front panel controls are inactive, so only change over to
this mode in a STOP status. An external switch has to be
connected to the DMX IN XLR between pins 2 and 1 or 3 and
1. Closing this contact momentary puts the
miniSTORE
in
PLAY, indicated by the PLAY led. The show plays till the end
and comes in STOP.
Automatic Play/Loop
To have the
miniSTORE
constantly playing the show in LOOP
after power on, dip switches 3 and 4 have to be set: 3 to
↓
and
4 to
↓
. Now the show is repeated as long as the unit is
switched on and the front panel controls are not active.
