Operation
The user interface consists of 4 illuminated momentary
pushbuttons, located on the front panel.
They are labeled:
REC, STOP, PLAY and LOOP.
REC STOP
PLAY LOOP
Record
Puts the device in RECORD READY, waiting for a DMX
change to start recording. This state is indicated by blinking of
the RECORD led. Depressing STOP will cancel the RECORD
READY status.
Pressing RECORD the second time before a DMX change
starts recording anyhow. The RECORDING status is shown by
full illumination of the RECORD led.
Depressing STOP will give a RECORD PAUSE condition,
indicated by an illuminated RECORD led and a blinking STOP
led. From here on one can go on with recording via RECORD,
again waiting for a DMX change or depressing RECORD
again or stop by pressing STOP for the second time.
The DMX signal to be recorded has to be applied to the DMX
IN connector. In RECORD READY and RECORD this signal is
looped through to the DMX OUT connector without
termination. In all other states the input signal is terminated.
Play
Starts playing the show, indicated by illuminating the LED in
the PLAY button. At the end, the unit comes in STOP.
Stop
Using this button the first time in RECORD status puts the unit
in PAUSE, a second push in STOP. In PLAY and LOOP the