Models With Glass Components
1. Fix the lower/outer chimney bracket on to the wall by drilling two (2) holes
with the corresponding size of the screws provided as seen in pic 2.
Note that this will be where the range hood is also mounted.
2. Measure the height desired for the chimney extension portion (upper/inner
chimney) and affix the bracket once finished as seen in pic 2.
3. Make sure that the exhaust pipe can fits properly within the outer and inner
chimney sections.
4. Attach the range hood onto the hooks that are attached to the lower bracket.
Make sure that these are hooked on properly before letting go of the item as
seen in pic 3.
5. Affix the glass according onto the body of the range hood by using the
supplied screws as seen in pic 4.
6. Fix the body with additional reinforcement / safety screws for additional
support as seen in pic 5.
*Note that the two additional holes for the safety screws are positioned at
the back of the casing with a diameter of 6mm.
