OPERATION
Controls
The switch is operated as illustrated.
“0”, press to turn off
“low”, press to activate speed setting 1
“middle” press to activate speed setting 2
“high”, press to activate speed setting 3
“light”, press to turn on, depress to turn off
CLEANING AND MAINTENANCE
Aluminum Filters
This unit comes equipped with removable
aluminum filters that are to be cleaned on a
regular basis in order to maintain the
performance and longevity of the hood.
Instruction:
To remove the filters, press the clip
located at the front, pull down the filters, and
release the clip.
Cleaning the Filters
1. Prepare a large basin with 40-60 degrees Celsius of warm water and
add a mild detergent to mix with the water.
Note: DO NOT use any corrosive detergent when cleaning.
2. Soak the aluminium filters for two (2) to five (5) minutes in the basin to
loosen the build-up of oil and grease.
3. Use a soft brush with fine bristles to gently scrub the aluminium filters.
Apply moderate strength, so as not to damage the filter.
4. Allow the filter to air dry until it is completely free from any moisture.
Recommendation
: Clean the filters at least once every month for regular
usage, or more frequently for heavy usage. Visually inspect the filter for trapped
oil and grease on a regular basis in order to maximize the performance of the
hood.
Warranty Exemption:
The aluminium filters are a consumable item and are
not covered by the warranty of this item. Any defects caused by the negligence
in cleaning the filters will also void the warranty of the hood.
